- Better Eyepieces! Most scopes have small glass. This has the larger 25mm diameter glass for optimal stress free viewing!
|
| Video Port and Camera Details |
- Includes a Complete Video Microscopy System!
- CCD Color Video Camera System for Output to Devices accepting NTSC Video Signal (TV’s, CCTV Monitors, VCR’s, or Computer via Video Capture Device).
- The CCTV Display Monitor is Not Included.
- Works on most Televisions and VCR’s for Viewing and Recording of Full Motion Video!
- Display the Image for All to See!
- Included Camera Details: 1/3 Inch CCD Color Video Camera, NTSC Video Output Format, 320 Horizontal Lines Resolution, Low Light Requirement. (Email for PAL Format).
- Includes Video Cable with RCA Fitting to easily connect to your Display Device.
- USB Computer Connectivity: Capture Digital Still Images and Live Full Motion Video on Your Computer!
- A second camera is also included. It is a USB connected digital camera with 640×480 pixel resolution.
|
- Measuring kit included as free bonus.
- Includes: Stage Micrometer with English and Metric marking lines for precise calibration of measuring reticle.
- Includes: Extra WF10x Eyepiece with Built-In Measuring Reticle, X-Scale, 10mm in 100 divisions.
- Use the stage micrometer to calculate the distances the eyepiece reticle represents at each magnification level.
|
| Boom Stand Specifications |
- Mobile Floor Stand Mounted Articulating Boom for Maximum Versatility and Working Area!
- Rollers on Six Feet for Excellent Mobility!
- Focusing Holder for Microscope Head.
- Spring Loaded Articulating Boom Arm can be Pulled Towards Working Area, then Retracted Out of the Way to Save Valuable working space!
- Multi-Axis Rotation: This Stand can rotate the scope head on any angle to view hard to see places. This is something that few booms can do. For example, if checking solder connections on a circuit board, this head can be rotated for better inspection.
- Complete Flexibility! Unit Pivots, Rotates, Swings, Extends, Retracts, Raises, Lowers, Rolls, Everything!
|
| Eyepieces and Magnification |
- Range of Zooming 3 - 120x magnification (using both eyepiece sets and bottom Barlow lens).
- Excellent High Ratio Zoom Range (Without Changing Eyepieces or adding bottom lens): 6.5x - 60x Continuous Magnification, With Included 30mm Wide Field 10x Eyepieces.
- Changing to 20x eyepieces gives up to 120x Magnification!
- A bottom 0.5x reduction Barlow lens is included. This is needed to increase the working distance of the scope so tools and hands have enough room for working.
|
- Includes Fluorescent Ring Light for Bright and Even Illumination.
- Spare ring fluorescent bulb is included.
|
| Head - Interpupillary Distance - Diopter |
- 45 Degree Inclined Trinocular Head, Rotatable 360 Degrees.
- Adjusts to the Distance Between your Eyes: 55 to 70mm InterPupillary Distance.
- Diopter Adjustment on Both Oculars to Correct for Your Specific Vision Needs.
|
| Focusing and Working Distance |
- Focusing Knobs on Both Sides of Focusing Holder to Raise/Lower Head into Focus.
- Rack and Pinion Steel Gears to Raise/Lower Focusing Holder.
- Working Distance, 100mm - w/o Bottom Lens on, (124mm w/ Bottom Lens on), This is the distance under the scope head as it is in focus. This is a reasonably good distance to allow room for hands and tools under the scope.
|
| Frame - Base - Size - Weight |
- Adjustable Height! Easily Adjust Height of Unit by Sliding an Inner Shaft Up or Down as Needed! Incredible 2 Feet (610mm) Vertical Sliding Travel. This puts the Total Extended Height (highest point) at an Incredible 6.5 Feet (About 2 Meters).
- Versatile Elevation Adjustment Range for Scope Head: 26 to 67 Inches from Floor to Bottom of Scope Lens.
- Spring Loaded Articulating Arm with Vertical Travel (Rise) of 18.5 Inches (470mm).
- Maximum Horizontal Extension (center of stand to center of focusing holder where scope head sits) 37 Inch (950mm).
- Multiple Points of Flexibility and Movement, Each of which can be Locked into Place.
- Extra Wide Base and Six Legs for Maximum Stability. (30 Inchs end to end of legs).
- Floor Rollers have Locking Mechanism to Prevent Movement when Engaged.
- Frame/Stand Made of Solid Steel for Durability and Stability.
- Total Floor Stand and Articulating Arm Weight (w/o Scope Head or Illumination System): 80 LBS.
|
- Includes Rubber Eye Guards for Blocking Stray Light.
- Includes Dust Cover.
- Includes phototube with standard 23mm internal diameter for attaching standard microscope photography equipment.
- Includes 1x c-mount for attaching standard ccd video camera equipment.
|
- Well Made, Quality Construction.
- Manufacturer Certified to ISO: 9001 Standard.
- Always NEW! We don’t sell anything used.
- 110 VAC (220 VAC Available for Europe and Asia).
|
- This unit is protected by a 5 Year Warranty from Manufacturer on the Microscope and included equipment.
|
- Optional Ring Fiber Optic Illumination System, 150 Watt Halogen, Variable Intensity.
- Optional polarizing system to fit to optional ring fiber optic unit. For shiny surfaces, polarization is often used in microscopy to enhance imaging of surface features and defects. The best polarizers have two polarized filters in the light path and can be rotated at angles, with 90 degrees often giving optimal results under cross polarized light.
- Optional c-mount with reduction lens for mounting to the trinocular port and attaching the ccd camera. This only affects the ccd video camera and not other photography equipment. It will reduce the ccd camera magnified image through the microscope trinocular photography port.
|
| What are you waiting for? Buy Now! |
|
|
